|
|
Adjustable Tenon Turning Tool
Turns tenons from less than 1/4" diameter to over 3/8" diameter using a drill press, an electric hand drill or mounted on a motor. Directions included.
|
 |
Carbide Replacement Cutter for Tenon Turning Tool
(6 cutting edges)
|
| Item# |
Price |
| TTC |
$7.00 |
Replacement Guide Pin for Tenon Turning Tool
|
| Item# |
Price |
| TG3 |
$7.00 |
 |
Set of 3 Rounded Drills for Boring Tobacco Hole
(3/4", 7/8", 1")
|
Combination Mortise Drill Bit & Shank-End Square
Bores 5/16" Diameter Mortise Hole 7/8" Deep, Simultaneously Squares Shank End for Perfect Stem Fit
|
 |
Item# |
Price |
| CT-1 |
$36.25 |
Countersink Tool For Countersinking Mortise Hole At Shank End
|
 |
Item# |
Price |
| CS1 |
$18.00 |
Drill Bit
(.128" diameter guide hole for Tenon Turning Tool)
|
| Item# |
Price |
| TD3 |
$1.50 |
5/16" Diameter Short Drill Bit, Special for Mortise
|
| Item# |
Price |
| TD4 |
$3.50 |
11/64" Diameter Drill Bit for Air Hole in Shank,
5 3/4" overall length
|
| Item# |
Price |
| TD5 |
$6.00 |
Arbors for Disc Buffs
Arbors are used to connect buffs to an electric hand drill, motor or drill press. They are the proper size to accommodate PIMO'S 6" diameter buffs for tripoli, carnauba, and final buffing. Each buff should have its own permanent arbor to insure that they run true. |
 |
Item# |
Price |
| AB 1 |
$3.50 |
Muslin Buff
6" Diameter, 20 Ply, 1/2" Hole,
(For Applying Tripoli compound)
Sewn Muslin Buff
6" Diameter, 20 Ply, 1/2" Hole,
(For Applying Carnauba)
Flannel Buff
6" Diameter, 20 Ply, 1/2" Hole
(For Final Buffing)
|
CLICK FOR ENLARGEMENT |
Stem Tightener Kit
For Tightening Loose Stems. Directions Included.
|
Item# |
Price |
| TLS1 |
$11.00 |
Finishing Products
SANDPAPER
Once the shape of your pipe is formed, sand with 180 grit, followed by 220, 320, 400, 600. For the final sanding use worn pieces of your finest grit.
|
| Description |
Item# |
Price |
| Assortment 5 Grits 180, 220, 320, 400, 600 |
FSA1 |
$5.50 |
ALCOHOL SOLUBLE STAINS
These powdered stains are very concentrated. Mix in a glass container with 1 to 2 ounces denatured alcohol
|
| Description |
Item# |
Price |
| Virgin | FS1 |
$2.25 |
| Cherry | FS2 |
$2.25 |
| Dark Walnut | FS3 |
$2.25 |
| Black (See page 90 of the Pipe Guide) |
FS4 |
$2.25 |
| Brown Mahogony | FS5 |
$2.25 |
| Medium Walnut | FS6 |
$2.25 |
WAXES
Quality pipes are waxed, buffed or oiled, not varnished or lacquered. Waxes are easily rubbed in; carnauba is better buffed. To smooth the friction of the tenon in the mortise use yellow beeswax.
When using buffing compound, if you don't have a buffer, mount your hand drill as shown on page 55 of the Pipe Crafting Guide. Fasten the muslin buff on a 1/2" arbor and proceed as shown on pages 92 to 94 of the Pipe Crafting Guide. Use the flannel buff for the final buffing without compound. |
| Description |
Item# |
Price |
| Carnauba Wax, Approx. 2oz. |
FWC |
$4.00 |
| Set of 3 Waxes - Yellow, White and Carnauba |
FW3 |
$4.25 |
| Brown Tripoli Buffing Compound 1 1/2 oz. Bar for Bowls & Stems |
FT1 |
$2.25 |
|
